Finding A Lost Handset; Using An Optional Headset - Uniden DCX400 User Manual

When you get a Call Waiting call, the phone sounds a tone and
displays any CID information received for the waiting call.
To answer a Call Waiting call, press
on a handset. The phone company automatically puts the
FLASH
current call on hold and switches you to the waiting call.
Use and
FLASH
remember, each time you switch, there is a short pause before
you're connected to the other caller.

Finding a Lost Handset

With the phone in standby, press
the handset you want to find, or select All to page all handsets at the
same time. The paged handset(s) will beep for 1 minute or until you
press
INTERCOM/HOLD
the handset.

Using an Optional Headset

You can use a standard 2.5 mm telephone
headset with your cordless handsets. To
purchase headsets, contact the Parts
Department (see the front cover).
To install a headset, remove the headset
jack cover and insert the headset plug into
the jack.
Just make and receive calls as usual, and
use your headset to talk to the caller after the call connects.
When you connect a headset, the handset automatically mutes
the earpiece and speaker. To re-activate the earpiece or speaker,
just unplug the headset.
to switch between the two calls;
TALK/FLASH
INTERCOM/HOLD
again or press
on the base or
FLASH
on the base. Select
followed by
TALK/FLASH
TALK/
on
END
(Belt clip
hole)
25