Uniden DCX400 User Manual page 29

Enter the primary number (up to 32 digits) for this entry
exactly the way you would dial it.
- If you need the phone to wait before sending the next set of
Edit
digits, press
Number1
- If two seconds isn't long enough, you can enter as many
pauses as you want.
- Each pause counts as one digit (you'll see a P in the number).
Edit Enter the secondary number for this entry just like you did the
Number2 primary number.
Personal (Handset only) Choose the ring tone you want the handset to
Ring use when this person calls. As you highlight each ring tone,
selection the handset sounds a sample of that tone.
Select the speed dial number (SPD0 through SPD9) you want
to assign to this entry.
- The speed dial numbers correspond to the numbers (0
through 9) on the twelve key dial pad.
Speed Dial
- Each speed dial number can be assigned to only one entry.
- If the speed dial number is already assigned, the phone
shows the name of the entry assigned to the number. If
you want to change it, select the number, and the phone
overwrites the existing assignment.
Editing an existing entry
1. With the station in standby, open the phonebook and find the entry you
want.
2. Press OPTIONS
choose Edit.
3. Highlight the individual
item you want to
change and press
SELECT . The phone
goes to the edit screen
for that item.
4. Edit the item as
described under "Creating a new entry" (above), and press
OR press BACK
5. Highlight the next item you want to edit and press
you're finished editing this entry, press
REDIAL/PAUSE
, then
Bob Smith
987-555-1234
123-555-9876
Clatter
Speed Dial 4
to cancel editing and return to the main entry.
to enter a two-second pause.
Edit
Edit Name
Personal ring (handset
SELECT
SAVE .
Edit Number1
Edit Number2
only)
Edit
Speed
Dial
OK .
. If
27