Advertisement
MAINTENANCE
Cabinet Maintenance
After using the washing machine, wipe the
moisture and stain with a piece of soft cloth.
To avoid damage on to the surface do not
use corrosive or volatile chemicals.
Operation when clothes or objects are outside
the spin tub (but within the cabinet)
1. Remove all screws of the frame with a screw driver and loosen
the connector of the brake belt.
2. Pull up the frame with both hands and turn the frame backwards.
3. Take out the clothes or objects.
4. Fasten the connector of the brake belt. Put back the frame and
tighten the screws.
After using the washing machine, never forget to do the following:
1. Disconnect the power plug.
2. Remove the water inlet hose.
If the following symptoms occur, please disconnect the power plug and perform
the following checks:
Symptom
• Check that the power supply is in good condition.
The washing
• Check that the power plug is inserted properly.
machine does
• Check that the wash timer knob or the spin timer knob
not work.
is not in the "0" position.
The drain hose
• Check that the drain hose is not laid too high.
does not work.
• Check that the drain hose is not blocked by foreign matter.
There is abnormal
• Check that there are no coins or any other foreign objects
noise during washing.
dropped into the wash tub.
There is abnormal
• Check that the washing machine is placed on flat, stable floor.
noise and violent
• Check that clothes are evenly distributed in the spin tub.
vibration during
• Check that there are no clothes or detergent foam outside the
spinning.
spin tub (but within the cabinet).
Cleaning the Lint Filter
• Press the button head and pull
the lint filter out.
• Turn the filter net inside out and
rinse it with water.
• After inserting the claw, press the button
to insert it in place.
• A clicking sound means proper installation.
Button Head
Claw
Frame
Cabinet
Reason
-8-
TECHNICAL SPECIFICATIONS
SPECIFICATION
FP-90LTT060GMTM-B
230V / 60Hz
POWER SUPPLY
6
LAUNDRY CAPACITY (kg)
55
MAX WATER LEVEL (L)
INPUT POWER (Watts)
320
735X430X845
NET DIMENSION (mm)
NET WEIGHT (kg)
18
FP-90LTL090GETM-B/R
FP-90LTL100GETM-B/R
230V / 60Hz
230V / 60Hz
8
10
65
80
505
535
827x485x865
870x512x957
21
23
-9-
Advertisement
