Advertisement
SAFETY PRECAUTIONS
Do not spray water directly to
Do not place heavy objects on
the machine.
the washing machine.
Make sure that the water inlet
Do not exceed the maximum
hose is connected and the tap
water level to avoid water
i
is opened before washing.
overflow and machine failure.
When washing with warm water,
water temperature should not
exceed 50°C.
Do not put hands inside the tub
when the machine is operating.
Do not damage the power cord
Securely plug the machine in the
and plug to avoid electric shock,
correct power source.
short circuit or fire.
Warning
Do not wash clothes that are
stained with kerosene, petrol,
alcohol, and other flammable
substance.
To avoid electric shock
resulting from electric leakage
please connect grounding wire
properly.
Do not wash raincoat, fishing coat
and similar heavy and thick items.
waterproof
Do not replace power cord
by yourself.
Do not pull the cord when
unplugging from the
power supply.
-2-
INSTALLATION
Do not plug or unplug the machine
Turn off the machine and unplug
to or from the power source when
from from power source after
barefoot and/or with wet hands.
using.
Installation
Change the Position of the Drain Hose
The ex-factory installation position of the drain hose is
located at the spin side. According to the installation site,
the drain hose can also be installed at the wash side of the
machine. The method is as follows:
1. Unplug the power cord and empty water in the drain
hose completely.
2. Spread a piece of soft cloth on the floor (e.g. blanket)
and place the washing machine on it gently.
3. Take the drain hose out from the buckle at the
spin side and put it into the buckle at the wash side.
4. Hang up the drain hose kit
Installation Site
In order to avoid electrical failure, discoloration and deformation, do not install the machine
in the following places:
• Locations exposed to
• Locations exposed to
direct sunlight
rain
Warning
Front
Drain hose
Buckle
Blanket
• Locations with uneven
or unstable ground
-3-
Advertisement
