Huawei UPS5000-S-880K-SM Quick Manual page 5

8. Cut off the cable ties binding holes of copper bars
numbered 23, 24, 25, 26, and 30. Install the soft
copper bars in the bypass cabinet and its adjacent
power cabinet from inside out.
10. Reinstall No. 10 protective plate removed in Step 6.
11. Insert the cable terminals of the bypass cabinet into the corresponding ports on the parallel
board of the power cabinet. The parallel board is located at the rear of the power cabinet
adjacent to the bypass cabinet and it can be seen after the rear cover is removed.
Bypass Cabinet
Bypass Cabinet Cable Label or Number
Cable Name
Bypass module
DL37 cable
ECM 8-pin cable
ECM system
monitoring bus
CT cable
Switch cable
W301_J21
W303_J24
W305_J22
W307_J25
W309_J26
SW1310
5
9. Remove the filler panel from the
power cabinet, and install the soft
copper bar numbered 52.
Port Silk Screen on the
Power Cabinet Parallel
Board or Cable Number
J21
J24
J22
J25
J26
04091626-23
Quantity
1
1
1
1
1
1