Placing A Call On Hold; Redialing A Call - Uniden DSS 2455 Quick Start Manual

UP308BH (DSS2465) ENG OM 1/14/05
• If you press ,
the operation
is canceled.
• When the telephone is
automatically redialing
a number, the speaker
function is disabled
for a few seconds.
[ 24 ]
11:46 AM Page 24

PLACING A CALL ON HOLD

1) During a call, press
on the base).
Once 10 seconds has passed or when you press
the call will be put on hold.
2) To talk to the caller, press
a handset (or (talk) on the base). The phone will
return back to the call.
You can hold a call for 5 minutes, when 5 minutes has
passed, the call is disconnected and the phone returns to
the standby mode.

REDIALING A CALL

The last three phone numbers dialed can be
quickly redialed.
Redialing from Standby Mode
1) Press the CID RDL PB soft key in the standby mode.
L M
2) Press / or to select "
", then press the OK soft key. The phone
number that was last dialed appears in the display.
L M
3) Press / or to toggle through the last
three phone numbers dialed.
4) Press or .
The selected number is dialed.
5) To hang up, press .
(or
,
or on
or
or