Uniden DSS 2455 Quick Start Manual page 70

UP308BH (DSS2465) ENG OM 1/14/05
Symptom
The handset or the base doesn't
ring or can't receive an
intercom call.
" " appears in
the display.
Severe noise interference.
The Caller ID does not display.
You cannot register the
handset at the base.
The handset doesn't communicate • Remove the base ID (see "Deregister the Base Setting" on page 22) and
with the base or other handsets.
[ 64 ]
11:49 AM Page 64
Suggestion
• Charge the batteries in the handset for 17-20 hours by placing the handset
on the base or charging cradle.
• The handset may be too far away from the base unit.
• Place the base unit away from appliances or metal objects.
• Remove the base ID (see "Deregister the Base Setting" on page 22) and
register the handset to the base (see "Register the Handset" on page 56).
• If more than 3 handsets are in use, you may not be able to page.
• Make sure that another handsets or the base is not in use, and try the
phone again.
• Make sure that you are not too far from the base.
• Keep the handset away from microwave ovens, computers, remote control
toys, wireless microphones, alarm systems, intercoms, room monitors,
fluorescent lights, and electrical appliances.
• Move to another location or turn off the source of interference.
• The handset was picked up before the second ring.
• The call was placed through a switchboard.
• Call your local telephone company to verify your Caller ID service is current.
• Please make sure your batteries are charged at least 10 minutes
(see "Register the Handset" on page 56).
• Remove the base ID (see "Deregister the Base Setting" on page 22) and
register the handset to the base (see "Register the Handset" on page 56).
• Only 4 handsets can be registered to the base.
register the handset to the base (see "Register the Handset" on page 56).
• Make sure that you have registered all handsets.