Replacing The Wireless Card; Procedure - Dell EMC Inspiron 3252 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Procedure

• Post-requisites
Procedure
CAUTION: To avoid damage to the wireless card, do not place any cables under it.
1. Align the notch on the wireless card with the tab on the wireless-card slot.
2. Slide the wireless card into the wireless-card slot.
3. Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card supported by your computer.
Connectors on the wireless card
Main (white triangle)
Auxiliary (black triangle)
4. Place the wireless-card bracket on the wireless card and align the screw hole on the wireless-card bracket with the screw hole on the
system board.
5. Replace the screw that secures the wireless card to the system board.
1. wireless card
3. tab

Replacing the wireless card

computer. After working inside your computer, follow the instructions in
2. notch
4. antenna cables (2)
Antenna-cable color
White
Black
Replacing the wireless card
25
After
39