Hi-Power Mode; Operation Mode Selectable - Toshiba RAS-18J2KVSG-E Service Manual

Item
23. Hi-POWER
([Hi-POWER] button on the remote controller
Mode
is pressed)
When [Hi-POWER] button is pressed while the indoor
unit is in Auto, Cooling or Heating operation, Hi-
POWER mark is indicated on the display of the remote
controller and the unit operates as follows.
1. Automatic operation
• The indoor unit operates in according to the
2. Cooling operation
• The preset temperature drops 1ºC
3. Heating operation
• The preset temperature increases 2ºC
4. The Hi-POWER mode can not be set in Dry
operation
Operating system setting
24. Operation
mode
setectable
• Do cut J804 for cooling only system
•
• Do cut J805 for heating only system
• Do cut both of J804 and J805 for return •
to factory default.
Operation flow and applicable data, etc.
current operation.
(The value of the preset temperature on the
remote controller does not change.)
The indoor unit's fan speed level increase 1 tap
(The value of the preset temperature on the
remote controller does not change.)
The indoor unit's fan speed level increase 1 tap
∗ The Hi-POWER operation will be cancelled
when press [Hi-POWER] button again.
1. Purpose
Choosing the operating system as
appropriate in real condition
2. Operation
Factory default setting prefer
"Heat pump" system. Through it is
able to cooling only system heating
only system or return to factory
default.
- 55 -
Description