Before Each Use - Roughneck 58267 Owner's Manual

FIG.2: Grounding guide
Installation
Standard installation
1: Cut-off valve
2: Filter
3: Regulator
4: Lubricator
5: Control valve
6: Locking adapter
7: Hose reel
The above installation is part of the oil supply system. If you need installation for the whole air circle
transfer, contact the manufacturer or distributor.
Note: To avoid damage, do not hang any device at the air inlet.

Place the pump into lock adapter (Fig 3, Part 6).

Install to the trolley.

Install cut-off valve (Fig 3, Part 1).

Install filter (Fig 3, Part 2).

Install regulator which controls the speed and adjusts the air pressure (Fig 3, Part 3).

Install lubricator which self-lubricates (Fig 3, Part 4).

Install control valve which controls flux. When the speed is too fast, pump will automatically
self-close to avoid pump be damaged (Fig 3, Part 5).

Connect to oil output.

Inspect before each use; check that all connections are tight and secure.

Never use if parts are damaged or broken; replace damaged or broken parts before operating.

Disconnect air hose and relieve air pressure before servicing.
Page 9 of 17
Fig.3: Oil supply system installation

Before Each Use

⚠WARNING