Specific Operation Warnings - Roughneck 58267 Owner's Manual


Do not force the pump. Products are safer and do a better job when used in the manner for which
they are designed. Plan your work, and use the correct product for the job.

Check for damaged parts before each use. Carefully check that the product will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate the
product with a damaged part.

Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with the
power switch is dangerous and must be repaired by an authorized service representative before
using.

Disconnect the power/air supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.

Store the pump when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.

Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with another
tool. Never use an accessory that has a lower operating speed or operating pressure than the tool
itself.

Keep guards in place and in working order. Never operate the product without the guards in place.

Do not leave the tool running unattended.

To prevent serious injury or property damage, read and understand owner's manual before
operating.

Wear ANSI Z87.1 compliant goggles and other protective gear while operating.

Do not exceed the maximum working air pressure of 175 PSI.

Never point the dispenser at people or animals.

Do not use the pump near open flames. Do not smoke during this operation.

When not in use, disconnect the air supply air to the pump.

Inspect before each use; check that all connections are tight and secure.

Never use product if parts are damaged; replace damaged or broken parts before operating.

Use only original parts when repairing the pump.

Always disconnect the air supply after use so that oil can't leak out in case one of the pump's
components should break.

The compressed air must be filtered to avoid dust and moisture into pump.
Page 6 of 17
⚠CAUTION
PUMP USE AND CARE

Specific Operation Warnings

⚠WARNING