EMC Disk Library DL4106 Setup And Cabling Manual page 18

Initialize the storage system
To initialize the storage system, you must configure the management network
interfaces for the storage system's storage processors (SPs) with the Navisphere
Storage System Initialization Utility.
Requirements for initialization
Make sure you have the following:
®
FLARE Operating Environment (OE) software version 03.26.080.5.yyy or higher
installed on the storage system. A card that ships with the storage system
indicates the FLARE version that is installed.
A host on the same subnet as the storage system's management ports and running
one of the operating systems listed below. This host may also be a server with
Fibre Channel connections to the storage system.
• Windows 2000
• Windows Server 2003
• Windows XP Professional
The completed CDL configuration planning worksheet on
information:
A static IP address and name for each storage processor in the storage system.
The subnet mask of the LAN to which each storage-system management port and
host is connected.
The default gateway address of the LAN to which each storage-system
management port is connected.
The security settings information which includes storage-system username and
password.
Step 9
16
page 4 with the following