Edition Notes The Ovation E-260WW User Manual includes a description, safety precautions, installation, programming, operation, and maintenance instructions for the Ovation E-260WW as of the release date of this edition. Trademarks Chauvet, Chauvet Professional, the Chauvet logo, and Ovation are registered trademarks or trademarks of Chauvet &...
The product has XLR sockets for DMX input and output. • Notice: This control circuit is isolated and belongs to the Class 2 data port. The control circuit has a cumulative leakage current of less than 3.5 mA. Ovation E-260WW User Manual Rev. 12...
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it. • In the event of a serious operating problem, stop using immediately. If this Chauvet product requires service, contact Chauvet Technical Support. Ovation E-260WW User Manual Rev. 12...
LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is 40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit the overall intensity. Ovation E-260WW User Manual Rev. 12...
Works perfectly with industry standard lens tubes and accessories Product Overview Name Name Safety loop DMX 5-pin in/out Pattern holder slot DMX 3-pin in/out Accessory slot powerCon in/out Framing shutter (x4) Fuse holder Barrel rotation knobs Menu buttons Display Ovation E-260WW User Manual Rev. 12...
DMX-compatible products with this product, it’s possible to control each individually with a single DMX controller. DMX Personalities The Ovation E-260WW uses a 3- or 5-pin DMX data connection for the 1 Ch, 2 Ch, 3 Ch, and 6 Ch DMX personalities. •...
Master/Slave Connectivity The Master/Slave mode allows an Ovation E-260WW (the master) to control one or more Ovation E- 260WW products (the slaves) without a DMX controller. One Ovation E-260WW becomes the master when running an auto program or in Static mode.
Only loosen or tighten the yoke knobs manually. Using tools could damage the knobs. Procedure The Ovation E-260WW comes with a yoke. The user can directly attach a mounting clamp (sold separately) to this yoke. Make sure the clamp is capable of supporting the weight of this product. For the Chauvet Professional line of mounting clamps, go to http://www.trusst.com/products.
Accessory Slot The Ovation E-260WW has an accessory slot, which holds a drop-in iris, a motorized pattern device, or various other optional accessories (sold separately). Loosen the thumbscrews on the slot cover. (Note: Do not remove the thumbscrews).
Navigates downwards through the menu list or decreases the value when in a function Control Options Set the Ovation E-260WW starting address in the 001–512 DMX range. This enables control of up to 32 products in the 6 Ch personality.
<_ _ _ _H> Shows total hours the product has been powered on LED Hours <_ _ _ _H> Shows total hours the LED has been powered on Information Version <V_._> Shows current firmware version <_ _ _ _ _ _> Shows product UID Ovation E-260WW User Manual Rev. 12...
To set the starting address in DMX mode: 1. Go to the DMX Address main level. 2. Select the starting address (001–512). Personality Highest Address 1 Ch 2 Ch 3 Ch 6 Ch Ovation E-260WW User Manual Rev. 12...
2. Set the strobe rate, from 0–255 (0–100%) Focus Mode The focus mode allows for the focusing of the Ovation E-260WW without changing any menu settings. 1. Press and hold <ENTER> for 3 seconds. The intensity will increase to 100%.
2. Select the desired auto program (Auto 1–4). 3. Set the program speed (1–100). Master/Slave To set the Ovation E-260WW product to master or slave mode: 1. Go to the Master/Slave main level. 2. Select from Master (sends control signal) or Slave (receives control signal).
6. Softly drag any dirt or grime to the outside of the transparent surface. 7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Ovation E-260WW User Manual Rev. 12...
For warranty terms and conditions and return information, please visit our website. For customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration. For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-registration. Ovation E-260WW User Manual Rev. 12...
Need help?
Do you have a question about the Ovation E-260WW and is the answer not in the manual?
Questions and answers