Attaching The Bass Boost Remote Control; Example Of Installation On The Floor Mat Or Chassis - Pioneer GM-D8704 Owner's Manual

( ___ l_ns_t_a_lla_t_io_n ________ )
Attaching the Bass boost
remote control
Attach with tapping screws (3 mm x 10 mm
(1/8 in. x 3/8 in.)) at an easily accessible loca-
tion such as under the dashboard.
I
l,J
Tapping screws (3mm x 10mm (1/8in. x 3/
8 in.))
Example of installation on
the floor mat or chassis
1 Place the amplifier in the desired instal-
lation location.
Insert the supplied tapping screws (4 mm x
18 mm (5/32 in. x 3/4 in.)) into the screw holes
and push on the screws with a screwdriver so
they make an imprint where the installation
holes are to be located.
2 Drill 2.5 mm (3/32 in.) diameter holes at
the imprints either on the carpet or directly
on the chassis.
En
(
_ _ _ _ _ _
)
3 Install the amplifier with the use of
supplied tapping screws (4 mm
x
18 mm
(5/32 in.
x
3/4 in.)).
G) Tapping-screws (4 mm
x
18 mm (5/32 in.
x
3/4 in.))
®
Drill a 2.5 mm (3/32 in.) diameter hole.
®
Floor mat or chassis
@ Hole-to-hole distance: 229.5 mm (9-1/32 in.)
®
Hole-to-hole distance: 191.5 mm
(7-17/32 in.)(!)