Bosch Professional GLM 400 Series Original Instructions Manual page 19

Pay attention that the reference plane of the measurement (e.g. the rear edge of the
measuring tool) remains exactly at the same location for all individual measurements
within a measuring sequence.
The laser beam remains switched on between the individual measurements.
Select the indirect height measurement
Measure distances „1" and „2" in this sequence as for a length measurement. Pay atten-
tion that a right angle exists between distance „1" and the sought distance „X".
Upon completion of the last measurement, the result for the sought
distance „X" is displayed in the result line (e). The individual meas-
20.000 m
ured values are displayed in the measured-value lines (d).
10.000 m
22.360 m
Memory functions
The value or end result of each completed measurement is automatically saved.
Memory value display
Maximum 15 values (measured values or end results) can be retrieved.
Press the memory button (6) [ ].
The number of the memory value is shown at the top of the display,
4
the corresponding memory value is shown at the bottom, and the cor-
6.350 m
responding measuring function is shown on the left.
7.620 m
Press the [+] button (3) to browse forwards through the saved val-
8.890 m
3
ues.
430.16 m
Press the [–] button (8) to browse backwards through the saved val-
ues.
If there is no value available in the memory, 0.000 is shown at the bottom of the display
and 0 at the top.
The oldest value is located in position 1 in the memory, while the newest value is in posi-
tion 15 (when 15 memory values are available). When a further value is saved, it is al-
ways the oldest value in the memory that is deleted.
Deleting the memory
Press the memory button (6) [ ] to delete the contents of the memory. Then briefly
press the on/off button (5) [ ] to delete the displayed measured value.
To delete all values in the memory, press the button (4) and the on/off button (5) [ ] at
the same time, then release the on/off button (5) [ ].
Bosch Power Tools
.
1 609 92A 5G9 | (06.11.2019)
English | 19