Advertisement
Tetra
PowerStrip Snap DS
®
Installation Options
Alternative Mounting
Mount modules
to sign structure.
2 fasteners may
be used for
added security.
Using Tetra
Snap T-Connectors
®
T-Connector
Using Tetra
Snap Interconnectors
®
Interconnector
Support
structure
The modules may be attached to any
structural member of the sign using one
#6 or M3 screw or 1/8" rivet. Ensure the
module's lip is tight against rail.
NOTE: Modules may be damaged by
improperly sized screws or over-torquing.
Screw must be at least 0.75 inches long.
Use a Tetra
Snap T-Connector to join
®
rails perpendicular to each other.
Use #6 or #8 screw to attach
T-Connector to side of rail.
NOTE: T-Connector must be secured
#6 or #8
with screws to the mounting rail.
screws
Use a Tetra
Snap Interconnecter
®
to join two rails and create longer
runs.
NOTE: Runs must be secured with
screws to supporting structure
at intervals no greater than
8 feet (2.43 m).
5
Installation Guide
Advertisement
