Advertisement
INSTALLATION GUIDE
Second Starter
Second Accessory
Second Ignition*
WIRING CONNECTIONS
12volts during crank only.
12volts in accessory. Off during start.
Constant 12volt power at ignition harness.
Constant 12volt power at ignition harness.
12volts in ignition and start positions.
Selectable Output. See jumper diagram.
Starter Program Mode.
User & Alarm Program Modes.
Manual Transmission Models Only.
Manual Trans & Alarm Units Only.
10 Amp Max.
MUST BE CONNECTED!!
Manual Trans& Alarm Units Only
MUST BE CONNECTED!!
MUST BE CONNECTED!!
MUST BE CONNECTED ON TACH MODELS!!!
DIESEL ONLY. **S tarter Program Mode.
Advertisement
