Product Description And Specifications; Intended Use; Product Features; Tool Specifications - Würth TG 12-A Translation Of The Original Operating Instructions

 In case of damage and improper use of the
battery, vapours may be emitted. Ventilate
the area and seek medical help in case of com-
plaints. The vapours can irritate the respiratory system.
 Use the battery only in conjunction with your
Würth power tool. This measure alone protects the
battery against dangerous overload.
 The battery can be damaged by pointed
objects such as nails or screwdrivers or by
force applied externally. An internal short circuit
can occur and the battery can burn, smoke, explode or
overheat.
 Use only original Würth accessories.

Product Description and Specifications

Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.

Intended Use

The machine is intended for cutting and roughing of metal,
stone and wood materials, plastics, non-ferrous metals and
tiles without the use of water. A specific protection guard must
be used when cutting.
For damage caused by usage other than intended, the user is
responsible.

Product Features

The numbering of the product features refers to the illustration
of the power tool on the graphics page.
1 Direction-of-rotation arrow on housing
2 Spindle lock button
3 On/Off switch
4 Battery pack*
5 Battery unlocking button*
6 Battery charge-control indicator
7 Protection guard for grinding
8 Grinder spindle
9 Handle (insulated gripping surface)
10 Protection guard for cutting*
11 Clamping bolt with washer
12 Cutting disc*
13 Hex key
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete over-
view of accessories can be found in our accessories pro-
gram.

Tool Specifications

Cordless-Cutter
Art. No.
Rated voltage
Rated speed
Grinding disc diameter, max.
Mounting hole diameter
Weight according to EPTA-Procedure
01:2014
Protection class
Permitted ambient temperature
– during charging
**
– during operation and during stor-
age
Recommended batteries
Recommended chargers
* depending on the battery pack being used
** limited performance at temperatures <0 °C

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise levels of the product are:
Sound pressure level 75 dB(A); Sound power level 86 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
determined according to EN 60745-2-3:
Surface grinding (roughing): a
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for differ-
ent applications, with different accessories or insertion tools or
is poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
5700 120 X
V=
-1
min
mm
mm
kg 0.70/0.89*
°C
°C
12V/x,x Ah
(triax vector sum) and uncertainty K
2
=13.5 m/s , K=1.5 m/s
h
TG 12-A
12
19500
76
10
/ II
0...+45
–20...+50
AKKU-LI
AL 30-LI
2
20