Rotary Evaporators RE400, RE401, RE402, RE400P, RE401P, RE402P Vacuum and On/Off switch water connections Rotating speed control Power supply holder Glass angle control Twist grip height adjustment handle Figure 1 Assembly Assembly and operating instructions Location & Services Before use In order to get the optimum performance from your Stuart rotary If the equipment is not used in the manner described in this evaporator careful consideration should be given to the intended...
Electrical Supply Lock Sleeve Spring side THIS EQUIPMENT MUST BE EARTHED Flask removal Before connection please read and understand this instruction sleeve manual and ensure that the line supply corresponds to that shown on the rating plate. Stuart rotary evaporators require a supply rated at 100-240V, 50/60Hz, single phase,~.
2. Place the stand on a level surface. You will require easy access to RE401, RE401P First remove the plastic connectors from the a water supply, drain, electric power and vacuum line to use your condenser and fit into the hose. Secure with a suitable clip, e.g. rotary evaporator.
Page 5
Setting the time reversal mode g) Lower the glassware until the rotating flask is partially immersed in the water. 1. Press the Power button. The display will come on and show the N.B. Ensure that the glassware does not touch the bath number of rotations as .
Warranty Care and Maintenance IMPORTANT: Before commencing any maintenance operation or Cole-Parmer Ltd. warrants this mechanical and electrical equipment replacement of components parts the unit should be isolated to be free from defects in material and workmanship, when used from the electricity supply, water supply and vacuum line. under normal laboratory conditions, for a period of three (3) years.
This product meets the applicable EC and so we cannot guarantee that interference will not harmonised standards for radio frequency occur in practice. Where there is a possibility that injury, interference and may be expected not to damage or loss might occur if equipment malfunctions interfere with, or be affected by, other equipment with due to radio frequency interference, or for general similar qualifications.
Need help?
Do you have a question about the Stuart RE400 and is the answer not in the manual?
Questions and answers