Advertisement
Troubleshooting
Use this table to understand and troubleshoot some common errors you may
receive and how to fix them.
Error, Probable cause, and Solution
Error Alert
Error 1701
"Cutter Jammed"
Error 37
"Cutter device not
found"
Error 1059
"Cutter does not
respond"
8
Probable Cause
A cut has been performed but
the shear has stopped on its
way back to home (bottom)
position.
Cutter cable came loose from
DIN connector
Cutter cable came loose from
DIN connector
Solution
Clean the shears
from adhesive
residue.
Reconnect cutter
cable connector to
DIN connector
Reconnect cutter
cable connector to
DIN connector
PX4ie and PX6ie Cutter Kit Installation Guide
Advertisement
Troubleshooting
