Fine Tune Tracking
NOTICE
Adjusting the final blade tracking setting
requires the machine to be turned ON.
To fine tune the tracking:
1.
ON
2.
Figure 61.
3.
24
4.
Figure 61
Page 24 Figure
Ripping
To make a rip cut:
1.
2.
3.
Figure 62
Note: If you are cutting nar-
row pieces, use a push stick to protect your
fingers.
Figure 62.
NEVER place fingers or hands in the line of
cut. In the event that something unexpected
happens, your hands or fingers may be
pulled into the blade. ALWAYS use a push
stick when ripping narrow pieces. Failure to
follow these warnings may result in serious
personal injury!
ON