Grizzly EXTREME Series Owner's Manual page 41

Workpiece
Inspection
Before cutting wood, get in the habit of
inspecting all workpieces for the following:
Material Type:
Foreign Objects (Figure 55):
Large/Loose Knots:
Wet or "Green" Stock:
Excessive Warping:
Minor Warping:
Figure 56
Figure 55.
Figure 56.
Because of its unpredicatable nature, use
extreme caution if cutting warped stock. The
difference between acceptable and unac-
ceptable warped stock varies from machine
to machine. If you are in doubt, square-up
the stock first or do not cut it.