Advertisement
Restart or Factory Reset a WiFi Device
What is this?
This Help Guide refers to Diligence™ WiFi data loggers, including Sensors and Alert
How do I Restart or Reset my Diligence™ WiFi data logger?
Under normal circumstances, you do not need to reset your Diligence™ WiFi data logger. However
you may be instructed to do this by our support team to recover a Device which is not working
properly, or return it to its factory state.
Restart
Performing a Restart on the WiFi Sensor will restart the internal firmware, retaining all configuration
and network settings. The Sensor will disconnect from the wireless network, and immediately enter
a low power sleep mode. It can take up to 30 minutes for the Sensor to re-connect and synchronize
after a Restart. Under normal circumstances the Sensor will synchronize within 15 minutes. Once
communication is re-established the Sensor returns to its normal transmission rate. A Restart will
cause a new recording session to be started.
To perform a Restart...
Part No: 20632-1 03/19
RF313-TH
From the Sensor Home screen
Press and hold the button for 10 seconds
Release when the
LOW
RF311-T, RF312-TP, RF312DualPlus,
RF312Glycol, RF314-TC, RF314Dual
From the Sensor Home screen
Press and hold the button for 10 seconds
Release when the LCD shows
symbol starts to flash.
Page 1 of 3
Advertisement
Table of Contents
Related Manuals for Fluke COMARK Diligence RF313-TH
Summary of Contents for Fluke COMARK Diligence RF313-TH
- Page 1 Restart or Factory Reset a WiFi Device What is this? This Help Guide refers to Diligence™ WiFi data loggers, including Sensors and Alert How do I Restart or Reset my Diligence™ WiFi data logger? Under normal circumstances, you do not need to reset your Diligence™ WiFi data logger. However you may be instructed to do this by our support team to recover a Device which is not working properly, or return it to its factory state.
- Page 2 Restart or Factory Reset a WiFi Device WiFi-AL (Alert) Press and hold the button for 10 seconds Release when the LEDs start to cycle. Factory Reset Performing a Factory Reset on the WiFi Sensor will clear all internal configuration and network settings.
- Page 3 Restart or Factory Reset a WiFi Device All other Sensor types RF311-T, RF312-TP, RF312DualPlus, RF312Glycol, RF314-TC, RF314Dual From the Sensor Home screen Press and hold the button for 20 seconds Release when the LCD shows RF324 Alert Press and hold the button for 20 seconds. The LEDs will cycle.
Need help?
Do you have a question about the COMARK Diligence RF313-TH and is the answer not in the manual?
Questions and answers