Network Stack Configuration; Nvme Configuration; Hdd Secure Erase; Hdd/Ssd Smart Information - Asus Q370M-IM-A Manual

XHCI Hand-off
This item is set to [Disabled] by default for the EHCI (enhanced host controller
interface) support by XHCI drivers in operating systems.
[Disabled] Support XHCI by XHCI drivers for operating systems with XHCI
support.
[Enabled] Support XHCI by BIOS for operating systems without XHCI
support.
USB Single Port Control
This item allows you to enable or disable the individual USB ports.
Refer to the manual for the location of the USB ports.
3.4.15

Network Stack Configuration

Network Stack
This item allows user to disable or enable the UEFI network stack. Configuration
options: [Disabled] [Enabled]
The following two items appear only when you set the previous item to
[Enabled].
Ipv4 PXE Support
This item allows user to disable or enable the Ipv4 PXE Boot support.
Configuration options: [Disabled] [Enabled]
Ipv6 PXE Support
This item allows user to disable or enable the Ipv6 PXE Boot support.
Configuration options: [Disabled] [Enabled]
3.4.16

NVMe Configuration

This menu displays the NVMe controller and drive information of the connected
devices.
3.4.17

HDD Secure Erase

This menu displays the HDDs that suppot Secure Erase function.
3.4.18

HDD/SSD SMART Information

This menu displays the SMART information of the connected devices.
Chapter 3: BIOS setup
3-29