Asus Q370M-IM-A Manual page 33

Administrator Password
If you have set an administrator password, we recommend that you enter the
administrator password for accessing the system.
To set an administrator password:
Select the Administrator Password item and press <Enter>.
1.
From the Create New Password box, key in a password, then press
2.
<Enter>.
3. From the Confirm New Password box, key in your password again to
confirm the password, then click OK.
To change an administrator password:
Select the Administrator Password item and press <Enter>.
1.
From the Enter Current Password box, key in the current password, then
2.
press <Enter>.
From the Create New Password box, key in a new password, then press
3.
<Enter>.
From the Confirm New Password box, key in your password again to
4.
confirm the password, then click OK.
To clear the administrator password, follow the same steps as in changing an
administrator password, but click OK when prompted to create/confirm the
password. After you clear the password, the Administrator Password item on top
of the screen shows Not Installed.
User Password
If you have set a user password, you must enter the user password for accessing
the system. The User Password item on top of the screen shows the default Not
Installed. After you set a password, this item shows Installed.
To set a user password:
Select the User Password item and press <Enter>.
1.
From the Create New Password box, key in a password, then press
2.
<Enter>.
From the Confirm New Password box, key in your password again to
3.
confirm the password, then click OK.
To change a user password:
Select the User Password item and press <Enter>.
1.
From the Enter Current Password box, key in the current password, then
2.
press <Enter>.
From the Create New Password box, key in a new password, then press
3.
<Enter>.
Chapter 3: BIOS setup
3-3