Apm Configuration; Serial Port Console Redirection - Asus Q370M-IM-A Manual

Change Settings
Allows you to choose the setting for Super IO device.
Configuration options: [Auto] [IO=378h; IRQ=5] [IO=378h;
IRQ=5,6,7,9,10,11,12] [IO=278h; IRQ=5,6,7,9,10,11,12] [IO=3BCh;
IRQ=5,6,7,9,10,11,12]
Device Mode
This item allows you to change the Printer Port mode.
Configuration options: [STD Printer Mode] [SPP Mode] [EPP-1.9 and SPP
Mode] [EPP-1.7 and SPP Mode] [ECP Mode] [ECP and EPP 1.9 Mode] [ECP
and EPP 1.7 Mode]
3.4.10

APM Configuration

CEC Ready
Enable this item to allow your system to comply with CEC (California Energy
Commission) regulations to save some power at S0 state. Configuration options:
[Enable] [Disabled]
Restore AC Power Loss
[Power On] The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system
state was before the AC power loss.
Power On By PCI-E
This item allows you to enable or disable the Wake-on-LAN function of the onboard
LAN controller or other installed PCIe LAN cards. Configuration options: [Disabled]
[Enabled]
Power On By Ring
[Disabled] Disables the Ring devices to generate a wake event.
[Enabled] Enables the Ring devices to generate a wake event.
Power On By RTC
This item allows you to enable or disable the RTC (Real-Time Clock) to generate
a wake event and configure the RTC alarm date. When enabled, you can set the
days, hours, minutes, or seconds to schedule an RTC alarm date. Configuration
options: [Disabled] [Enabled]
3.4.11

Serial Port Console Redirection

Console Redirection
Allows you enable or disable the console redirection feature.
[Enabled] [Disabled]
Chapter 3: BIOS setup
Configuration options:
3-27