Table of Contents
Advertisement
8695 5601 / D
A - SAFETY INSTRUCTIONS
ELECTROMECHANICAL EQUIPMENT USED AS THE SUBASSEMBLY OF AN
1 - SERVICING
2 - PERSONAL PROTECTION
TOPTIG
INSTALLATION.
This equipment can be associated with a
welding installation, in which case it is covered by
safety instructions described in the instructions for the
welding installation
If this equipment is used in other cases, a
minimum of instructions must be respected, in
particular :
Check often that the insulation and connections of
the electrical equipment and accessories are in
good condition: plugs, cables, flexible cables,
sheaths, connectors, extension cables, workpiece
clamps, electrode holders or torches...
Maintenance and repair work on insulating
sheaths and covers should never be carried out in
a makeshift manner.
Have defective accessories repaired by a
specialist or, better still, replace them.
Periodically check that electrical connections are
properly tightened and do not overheat.
RISK OF EXTERNAL INJURY
The operator must be properly dressed and
protected for the work he is carrying out
Ensure that no part of the operator's body or of his
assistant's body can come in contact with metal
parts and workpieces which are energized or
which could accidentally become energized
and/or which are moving.
Do not wrap electrical cables around your body.
A-1
Advertisement
Table of Contents
Troubleshooting
