Adjusting The Temperature Control - U-Line pmn User Manual

The ice bin door must be fully closed with the door lip inside the ice
bucket.
Frost free models: Do not place any objects over air inlet or outlet in
freezer section.
For frost free models: Light frosting may occur in high humidity condi-
tions or if the ice bucket is not pushed in completely.
BI 2015 is not frost free and must be defrosted periodically. Refer to
MAINTENANCE.
Do not place cans or bottles so they are touching the back of the unit.
If placed against the evaporator section, cans or bottles may freeze.
ADJUSTING THE TEMPERATURE
CONTROL KNOB
Series 2015 and 2075: Adjust
control setting by turning the
numbered knob attached to the
front grille (see Figure 21).
CHECKING TEMPERATURE
To accurately check the tem-
perature, insert an accurate
thermometer into a plastic
(non-breakable) bottle, partial-
ly filled with water. Tighten the
bottle cap securely
Figure 22).
Place the bottle in the desired
area for 24 hours. Refrain
from opening the unit during
the testing period. After 24
hours, check the temperature
of the water. Adjust the control
knob if necessary and retest.
CONTROL
(see
17
4
3
5
2
6
7
1
Figure 21
UL320
Figure 22
UL315