Built-In Installation - U-Line 75 User Manual

BUILT-IN INSTALLATION

Your U-Line product is designed to be built-in or freestanding. When
built-in, they do not require additional air space for the top, sides, or
rear. However, the front grille must NOT be obstructed.
Required for ease of installation and door opening, you
must allow an additional 1/4" to width of unit.
29A, 29FF Combo Models, and 75A require additional
clearance when the door opens from the right (Figures 16
and 17). This additional clearance allows for the ice bucket
to be removed from the unit.
Model
SP18
95
98
15 Series
29 Series
75 Series
75 BEV
AT LEAST 1" CLEARANCE REQUIRED IF
UNIT IS INSTALLED FLUSH WITH
CABINET OR WALL.
CABINET OR WALL
Figure 16
Unit Dimensions
Width
13-15/16"
13-13/16"
14-13/16"
14-15/16"
20-13/16"
23-7/8"
23-15/16"
1.000
UL126
NOTE
NOTE
Height
18-1/2"
24-3/4"
27-3/8"
34-35"
28-1/2"
34-35"
34-35"
AT LEAST 9" REQUIRED IF UNIT IS
INSTALLED ADJACENT TO
CABINET OR WALL.
19
Depth*
25-1/4"
17"
20"
23-3/4"
24"
24"
24"
9.000
CABINET
OR WALL
Figure 17
UL125