Built-In Installation - U-Line 2075 User Manual

User's Manual

BUILT-IN INSTALLATION

Your U-Line product is designed for built-in installation only. When built-in,
it does not require additional air space for the top, sides, or rear.
However, the front grille must NOT be obstructed.
To ease unit installation and removal, it is recommended that
the cabinet rough opening dimensions be increased by at
least 1/4" over the dimensions given for your unit.
Width
23-15/16"
* For full overlay door panels, add 3/4".
Once the unit is leveled and placed into the wall or under a
cabinet, it is ready to be secured to the wall or cabinet with the anti-tip
system (Figure 7).
Follow the instructions included with the anti-tip kit.
The anti-tip kit must be installed on this unit before it is used.
Never use the drawers as steps or a shelf to support more
than the drawers' content.
NOTE
Unit Dimensions
Height
34-1/8"
!
WARNING
10
Depth*
24"