Safety System; Before First Use; Using The Appliance - TEFAL Frutelia Metal Manual

DESCRIPTION
A Pusher
B Feeding tube
C Cover
D Sieve
E Juice collector
F Pouring Spout with
anti-drip system

SAFETY SYSTEM

To start the juicer, the cover (C) must be fitted correctly
clamps properly locked
At the end of a cycle, turn the control button to "0" and wait until the
sieve (D) stops completely before removing the cover (C).

BEFORE FIRST USE

We recommend that you wash the removable parts (A, B, C, D, E, G) before
the first use (see section "Cleaning and care").
Unpack the appliance and then place it on a solid, stable worktop, remove
the cover (C) and take out the protective card on the sieve (D).

USING THE APPLIANCE

• Place the pulp container in the correct position (see
• Place the juice collector (E) on the body of the appliance (see
• Place the sieve (D) in the juice collector (E). Ensure that the sieve is
properly clipped onto the drive shaft (K) (see
• Fit the cover (C) on the appliance in order to have the pulp evacuation
exit to the rear (see
• Lock the two handles (H) on the cover (C). You will hear an audible "click"
(see Fig. 4).
• Slide the pusher (A) into the feeding tube (B) aligning the groove on the
pusher with the small ridge in the feeding tube.
• Place a glass under the pouring spout (F) in front of the appliance
(see Fig. 5).
4
(Fig. 4).
Fig. 3).
G Pulp container
H Locking Handles
I
Control button
J
Motor unit
K Drive shaft
L
Anti-slip feet
Fig. 2).
(Fig. 2) and the
Fig. 1)
Fig. 2).