Safety System; Before First Use; Using The Appliance - TEFAL ZE370138 Manual

CAUTION: the safety precautions are part of the
appliance. Read them carefully before using your
new appliance for the first time. Keep them in a
place where you can find and refer to them later
on.
DESCRIPTION
A Pusher
B Feeding tube
C Cover
D Sieve
E Juice collector
F Pouring spout

SAFETY SYSTEM

To start the juicer, the cover (C) must be fitted correctly (Fig. 3) and the
clamps properly locked (Fig. 5).
At the end of a cycle, turn the control button to "0" and wait until the
sieve (D) stops completely before removing the cover (C).

BEFORE FIRST USE

We recommend that you wash the removable parts (A, B, C, D, E, F, G)
before the first use (see section "Cleaning and care").
Unpack the appliance and then place it on a solid, stable worktop, remove
the cover (C) and take out the protective card on the sieve (D).

USING THE APPLIANCE

• Place the juice collector (E) on the body of the appliance (see Fig. 2).
• Place the sieve (D) in the juice collector (E). Ensure that the sieve is
properly clipped onto the drive shaft (K) (see Fig. 2).
• Fit the cover (C) on the appliance in order to have the pulp evacuation
exit to the rear (see Fig. 4).
4
G Pulp container
H Locking Handles
I
Control button
J
Motor unit
K Drive shaft
L
Anti-slip feet