Safety System; Safety Instructions; Before Using For The First Time; Using The Juicer - TEFAL SIMPLY INVENTS DUO Manual

We thank you for the confidence you have shown in our product range.
Read the instructions for use carefully before using your appliance for the first time.
EN

Safety system

This appliance is fitted with a safety system. To start the juicer, the lid (C) must be perfectly
locked by the two locking clips (H). If just one of the locking clips (H) is open, the juicer will
stop.
At the end of a cycle, turn the control button (I) to "0" and wait until the filter (D) stops
completely before removing the lid (C). An inappropriate choice of speed can lead to the
abnormal vibration of the unit.
• Always check the filter (D) before use.
• Never use the juicer if the filter is broken, if it is defective, if you see cracks or breaks or if
the filter is torn. If the filter is visibly damaged, contact an Authorised Service Centre.
Handle the filter with care (risk of cutting).
• For your safety, this appliance complies with applicable standards and regulations:
- Low Voltage Directive
- Electromagnetic Compatibility
- Materials in contact with food
• Check that the power voltage indicated on the nameplate of the appliance corresponds to
that of your mains installation. Any connection error will invalidate the warranty.
• Do not place or use this appliance on a hotplate or near a naked flame (gas cooker).
• Do not immerse the motor unit in water, or put it under running water.
• If the power cord is damaged, it must be replaced by the manufacturer, its after-sales ser-
vice or any person with similar qualifications, in order to avoid any danger.
• Only use the appliance on a stable work surface away from water splashes. Do not turn it
over.
• Never dismantle the appliance yourself. Any maintenance other than routine cleaning and
upkeep by customers must be carried out by an approved service centre.
• The appliance should be unplugged:
- if there is a malfunction during operation
- each time it is assembled, disassembled or cleaned.
• Never unplug the appliance by pulling on the power cord.
• Only use an extension lead after checking that it is in perfect working order.
• A household appliance must not be used:
- if it has been dropped on the floor
- if it has been damaged or is incomplete.
• In these cases, as for all other repairs, YOU MUST send it to an Authorised Service Centre.
• This product is designed for domestic use only. The manufacturer shall not accept any
liability for any professional use and the warranty shall not apply.
• This appliance is not intended for use by people (including children) whose physical,
sensory or mental capacities are disabled, or by people with no experience or familiarity
with such appliances, unless they are supervised by a person who is responsible for their
security or have received instructions as to how to use the appliance.

Safety Instructions

6
• Children must be supervised to ensure that they do not play with the appliance. Always
use only original accessories or components. Otherwise, the manufacturer shall not accept
any liability.
• Never place your fingers or any other object in the feeder tube (B) while the appliance is
working. Use only the push rod (A) provided for this purpose.
• Do not remove the lid (C) until the filter (D) has completely stopped.
• Do not remove the pulp collector (G) while the appliance is working.
• Always unplug the appliance after each use.
• If you are using the juicer with hard fruits or vegetables, it is recommended that you use it
for a quantity less than 3 kg and no more than 2 minutes continuously. Some fruits and ve-
getables which are too hard can cause a malfunction of the appliance. If so, turn off the
appliance and verify that the filter (D) is correctly positioned.
Description
A Pushrod
Feeder tube
B
Lid
C
D Filter
Juice collector
E
Spout
F
G Pulp collector
Locking clips
H
I Control button (2 speeds)
J Drive shaft
Motor unit
K
• We recommend you wash the parts (A, B, C, D, E, G, L, L1, L2, O, O1,O2, P) before the first
use (see cleaning).
• Unpack the appliance and place it on a stable work surface, loosen the two clips (H), remove
the lid (C), remove the protective cardboard on the filter (D) then take out the filter and the
juice collector (E).

Using the juicer

• Place the juice collector (E) on the motor unit (K) (see Fig. 1).
• Place the filter (D) in the juice collector (E). Make sure the filter is properly clipped to the
drive shaft (J) (you should hear a "click") (see Fig. 2).
• Place the lid (C) on the juice collector (E) (outlet to the rear) (see Fig. 3).
• Position the 2 locking clips (H) on the lid (C). Make sure the 2 locking clips are properly
clipped to the lid (see Fig. 4).
• Place the pulp collector (G) at the back of the appliance by slightly tilting it forward and
then sliding it under the lid (C) (see Fig. 5).
• If you want to separate the juice from the froth, insert the froth separator (L2) in the juice
jug (L). Place the lid (L1) on the juice jug (L) (see Fig. 6a).
L Juice jug
1 Lid
L
2 Froth separator
L
M Brush
Drip tray
N1
Stainless steel grid
N2
O Citrus press
Citrus press grid
O1
O2 Cone
P Cord storage

Before using for the first time

7