Yamaha PC412-D Quick Start Manual page 6

NOTICE
To avoid the possibility of malfunction/ damage to the product,
damage to data, or damage to other property, follow the notices
below.
 Handling and maintenance
• Do not use the product in the vicinity of a TV, radio, or other
electric products. Otherwise, the product, TV, or radio may
generate noise.
• Do not expose the product to excessive dust or vibration,
or extreme cold or heat, in order to prevent the possibility
of panel disfiguration, unstable operation, or damage to
the internal components.
• Do not install in locations where temperature changes are
severe. Otherwise, condensation may form on the inside or
the surface of the product, causing it to break.
• If there is reason to believe that condensation might have
occurred, leave the product for several hours without turn-
ing on the power until the condensation has completely
dried out, in order to prevent possible damage.
• Do not use this product for any purpose other than driving
loudspeakers, since damage may result.
• Do not place vinyl, plastic or rubber objects on the prod-
uct, since this might cause alteration or discoloration of the
panel.
• When cleaning the product, use a dry and soft cloth. Do
not use paint thinners, solvents, cleaning fluids, or chemi-
cal-impregnated wiping cloths, since this might cause
alteration or discoloration.
• Do not apply oil, grease, or contact cleaner to the faders.
Doing so might cause problems with electrical contact or
fader motion.
This is a class A product. Operation of this product in a residen-
tial environment could cause radio interference.
The model number, serial number, power requirements, etc., may be found on or near the name plate, which is at the top of the unit.
You should note this serial number in the space provided below and retain this manual as a permanent record of your purchase to
aid identification in the event of theft.
Model No.
Serial No.
PC-D series
This mark indicates a dangerous electrically live terminal. When connecting an external wire to this terminal, it is necessary
either to have "a person who have received appropriate guidance on handling" make the connection or to use leads or a cord that
have been manufactured in such a way that the connection can be made simply and without problem.
6
Information
 About functions/data bundled with the prod-
uct
• Even when the [ ] (Standby/On) switch is in standby sta-
tus (power lamp is off/ display is off), electricity is still flow-
ing to the product at the minimum level. When you are not
using the product for a long time, make sure you unplug
the power cord from the wall AC outlet.
• This product/This software uses Dante Broadway.
Refer to the Audinate website (English) for details on the
open‐source licenses for the particular software.
https://www.audinate.com/software-licensing
• XLR-type connectors are wired as follows (IEC60268 stan-
dard): pin 1: ground, pin 2: hot (+), and pin 3: cold (-).
 About this manual
• The illustrations and screens as shown in this manual are
for instructional purposes only.
• Windows is a registered trademark of Microsoft(R) Corpo-
ration in the United States and other countries.
• The company names and product names in this manual
are the trademarks or registered trademarks of their
respective companies.
• Software may be revised and updated without prior notice.
 About disposal
• This product contains recyclable components.
When disposing of this product, please contact the appro-
priate local authorities.
European models
Purchaser/User Information specified in EN55103-2:2009.
Conforms to Environments: E2, E3 and E4
Yamaha cannot be held responsible for damage caused by
improper use or modifications to the product, or data that is
lost or destroyed.
PC-DI series
(top_en_01)
(hazardous)