Table of Contents
Advertisement
Factory Preset E: 1in-2out BRIDGE
INPUT A1+D1
PROCESSOR
VOLUME
PROCESSOR
VOLUME
Here we explain how to recall a factory preset.
WARNING
For safety, do not input sound while recalling an
amplifier preset.
The volume might change significantly.
1.
In the MENU screen, turn the main knob to select
"AMP PRESET," and press the main knob to confirm.
The AMP PRESET screen appears.
2.
In the AMP PRESET screen, turn the main knob to
select the amplifier preset that you want to recall, and
press the main knob to confirm.
A screen for selecting the operation appears.
Lock symbol
A protected amplifier preset
The currently selected
amplifier preset
14
3.
Turn the main knob to select "RECALL," and press the
SPEAKERS
main knob to recall.
AMP
A
AMP
C
Send a low-level audio signal to this unit, and verify that
undistorted sound is output from each speaker or subwoofer.
When you have verified this, the system is ready for use. Use
additional settings such as gain, delay, and EQ to add finish-
ing touches to the sound. For details on operation, refer to
"PC412-D/PC406-D/PC412-DI/PC406-DI Owner's Manual
(HTML)."
Volume operations
1.
In the HOME screen, press a channel select key to
select the channel whose volume you want to control,
and then turn the main knob.
:
Mute operations
1.
While holding down the channel select key of the
channel that you want to mute, press the main knob.
The mute setting alternately turns on/off for the selected
channel.
To defeat mute, once again press the channel select key
of the muted channel simultaneously with the main knob.
While muted, the channel LED is lit red, and the indica-
tion [MUTE] appears in the upper part of the HOME
screen.
Advertisement
Table of Contents
