Elo TouchSystems 3200L User Manual page 43

iii) Reorient the affected receiver's antenna.
iv)Plug the digital device into a different AC outlet so the digital device and the receiver are on
different branch circuits.
v) Disconnect and remove any I/O cables that the digital device does not use.(Unterminated I/O
cables are a potential source of high RF emission levels.)
vi)Plug the digital device into only a grounded outlet receptacle. Do not use AC adapter plugs.
(Removing or cutting the line cord ground may in crease RF emission levels and may also present
a lethal shock hazard to the user.)
If you need additional help, consult your dealer, manufacturer, or an experienced radio or
television technician.
III. Agency Certifications
The following certifications and marks have been issued or declared for this monitor:
Argentina S-mark
Australia C-Tick
Canada CUL
Canada IC
China CCC
China RoHS
Europe CE
Japan VCCI
Mexico NOM
Russia & CIS GOST
United States FCC
United States UL
User Manual – Interactive Digital Signage
SW601176 Rev A - Page 43 of 45