Elo TouchSystems 3200L User Manual page 21

Select the desired mounting orientation from the display's On-Screen Display (OSD)
Mounting menu for OSD text rotation and to light the correct logo.
The holes located on the sides and top of the touchmonitor case are for ventilation. Do not
block or insert anything inside the ventilation slots
Rear VESA Mount
For the 32" model:
A four-hole, 600x200mm mounting pattern is provided on the rear of the monitor.
The VESA FDMI-compliant mounting is coded: VESA MIS-F, 600X200, Y, 6, 90
For the 42", 46", and 52" models:
An eight-hole, 600x400mm mounting pattern is provided on the rear of the monitor.
The VESA FDMI-compliant mounting is coded: VESA MIS-F, 600X400, Y, 6, 90
Refer to Appendix C, Technical Specifications, for dimensional drawings.
Optional Stand
To install the optional stand:
Lay the monitor face-down on a table with the bottom edge flush to the edge of the table.
Mount the two "feet" from the optional stand using all of the provided screws.
3200L
User Manual – Interactive Digital Signage
SW601176 Rev A
4200L / 4600L
- Page 21 of 45