Elo TouchSystems 3200L User Manual page 25

Using the OSD buttons controls an on-screen graphical user interface which displays on top of
your input video, allowing intuitive adjustment of the following display parameters:
Parameter
Increase/decrease monitor brightness.
Brightness
Default: maximum
Increase/decrease monitor contrast.
Contrast
Allows fine adjustments of the panel's pixel dot clock.
Clock Not applicable when using HDMI video or the Computer Module.
Adjusting too far will adversely affect APR functionality.
Allows fine adjustments of the panel's pixel dot clock phase.
Phase Not applicable when using HDMI video or the Computer Module.
Adjusting too far will adversely affect APR functionality.
Automatically adjusts the system clock to the input analog VGA video signal, affecting
the H-position, V-position, Clock, and Phase menu items.
Auto Adjust
Not applicable when using HDMI video or the Computer Module.
Adjusting too far will adversely affect APR functionality.
Moves the image horizontally on the display in single-pixel increments.
Default: centered.
H-position
Not applicable when using HDMI video or the Computer Module.
Adjusting too far will adversely affect APR functionality.
Moves the image vertically on the display in single-pixel increments.
Default: centered.
V-position
Not applicable when using HDMI video or the Computer Module.
Adjusting too far will adversely affect APR functionality.
Switches the scaling method between Full Scaling and Maintain Aspect Ratio.
Default: Full Scaling
Full Scaling – scales the X- and Y-dimensions of the input video (up or down as
needed) to the display's native resolution.
Maintain
Maintain Aspect Ratio – Assuming a landscape orientation and an input video with
Aspect Ratio
aspect ratio smaller than 16:9, scales the Y-dimension of the input video (up or down
as needed) to the display's Y-resolution, and scales the X-dimension to maintain the
input video's aspect ratio (and fills the rest of the display with equal black bars on the
left and right).
Note: For full APR touch functionality, keep this setting on "Full Scaling".
Adjusts sharpness of the displayed images.
Sharpness
Default: no sharpness adjustment
Selects the display's color temperature. The available color temperatures are
9300K, 7500K, 6500K, 5500K, and User Defined. If the User Defined option is
Color
selected, the user can change the color temperature by changing individual R, G, and
Temperature
B gains on a scale from 0 to 100.
Default: User Defined with R, G, and B all set to 100.
Adjusts how long a period of OSD button inactivity the touchmonitor will wait before
closing the OSD. The adjustable range is between 5 and 60 seconds.
OSD Timeout
Default: 15 seconds
Available Adjustment
User Manual – Interactive Digital Signage
SW601176 Rev A - Page 25 of 45