Download
Share
Print this page
  1. Manuals
  2. Brands
  3. VeriFone Manuals
  4. Payment Terminal
  5. PINpad 1000SE
  6. Setting up

VeriFone 1000SE Setting Up

Setting up the pinpad via usb
Hide thumbs Also See for 1000SE:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
th
One Blue Hill Plaza, 16
Floor, PO Box 1546
Pearl River, NY 10965
1-800-PC-AMERICA, 1-800-722-6374
(Voice) 845-920-0800 (Fax) 845-920-0880
Setting Up the Verifone 1000SE
Pinpad via USB
This document explains how to connect the Verifone Pinpad 1000SE (P/N P003-180-02-USB) to a
computer via USB and configure CRE or RPE to communicate with it.
1 |
P a g e

Advertisement

loading

Related Manuals for VeriFone 1000SE

Summary of Contents for VeriFone 1000SE

  • Page 1 (Voice) 845-920-0800 (Fax) 845-920-0880 Setting Up the Verifone 1000SE Pinpad via USB This document explains how to connect the Verifone Pinpad 1000SE (P/N P003-180-02-USB) to a computer via USB and configure CRE or RPE to communicate with it. P a g e...
  • Page 2 Connecting the VeriFone Pinpad 1000SE to a computer via USB To connect the 1000SE to a computer via USB, you will need the following cables: The USB cable part number is: 24625-02-R Rev A 1. Plug end 1 of cable 2 into the Verifone 1000se.
  • Page 3 Installing drivers for the USB-to-Serial cable used with the VeriFone Pinpad 1000SE If the 1000SE is connected to the computer via USB, special drivers will need to be installed. Double-click PL2303_Prolific_DriverInstaller_v10518.exe and follow these steps. Note: You can download the USB-to-Serial cable driver from: http://download2.pcamerica.com/drivers/PL2303_Prolific_DriverInstaller_v10518.zip...
  • Page 4 Determining which COM port is being used by the USB-to-Serial cable Even if the USB-to-Serial cable is used, the computer thinks the 1000SE is connected to a COM port. To find out which COM port the computer has assigned to the 1000SE, follow these steps.
  • Page 5 P a g e...
  • Page 6 Configuring CRE or RPE to communicate with the VeriFone Pinpad 1000SE To configure CRE or RPE to communicate with the 1000SE, start CRE or RPE, select Manager, provide the requested credentials, and follow these steps. 1. Select Setup and then Setup Screen.