Table of Contents
Advertisement
VESA MOUNT
1.
Carefully remove the monitor from the packaging with foam attached and place it
face down on a soft cloth spread across a stable surface such as a table.
2.
Remove the connection block from the back of the monitor by pressing the detach
button. If the stand is attached, remove it.
Stand stem
3.
Remove the original screws ( ) from the opening in the back of the monitor.
4.
Follow the directions with your mount, stand or accessory and install the monitor
on the wall or future as desired, using the included 4 screws when mounting the
monitor. Refer to the image ( ) for correct screw placement.
Stand base
Monitor
Foam
Mount (Not included)
Stand plate
Button
Advertisement
Table of Contents
