Tenda PH10 User Manual page 26

4.6.3 LED Control
The following figure shows the available LED indicator control modes. Select one of the modes as required and
click OK.
Parameters Description
Parameter
Always On
Always Off
Schedule
Turn Off During
Turn Off On
4.6.4 Time Settings
Time-based functions, such as Wi-Fi Schedule and LED Control, require correct time zone settings.
To set the time zone of PA7, perform the following steps:
Step 1 Choose System, and move to the Time Settings part.
Step 2 Select your time zone, and click OK on the bottom of this page to apply the settings.
After the settings are saved, check whether the time displayed in Current Time is correct.
Description
It indicates that all the LED indicators of PA7 are in ordinary states.
It indicates that all the LED indicators of PA7 are turned off.
It indicates that all the LED indicators of PA7 are turned off in specified periods and
return to their ordinary states when the periods expire.
It allows you to specify a period to turn off the LED indicators of PA7.
It allows you to specify days to turn off the LED indicators of PA7.
21