D-Link DIS-200G Series Hw Installation Manual page 29

DIS-200G Series Layer 2 Gigabit Industrial Smart Managed Switch Hardware Installation Guide
Step 1 - System IP Information
In this window, the user can configure the IP address assignment method, the static IP address, netmask and
gateway address.
The fields that can be configured are described below.
Parameter
Static
DHCP
IP Address
Netmask
Gateway
Tick the Ignore the wizard next time option to skip the Smart Wizard on the next login.
Click the Exit button to discard the changes made, exit the Smart Wizard, and continue to the Web UI.
Click the Next button to accept the changes made and continue to the next step.
Step 2 – User Account Settings
In this window, the user can configure the password of the administrator account used to access the web UI.
Figure 5-2 Configuring Switch network information
Description
Select this option to manually configure and use IP address settings on this switch.
Select this option to obtain IP address settings from a DHCP server.
If you selected Static, enter the IP address of the switch here.
If you selected Static, select the netmask here.
If you selected Static, enter the default gateway IP address here.
29