Friedrich FSHSW36A3A Installation And Operation Manual page 28

Installation of indoor unit
2. (QVXUH WKDW SRZHU ZLUHV DUH URXWHG
WKURXJK WKH SURSHU RSHQLQJ EHKLQG WKH
XQLW
3. Remove wire strain relief. Connect each wire to the corresponding terminal.
Tighten the terminals to ensure solid connections.
4. Put wiring cover back and then tighten the screw.
5. Close the panel.
6. Install the Conduit assy.
1) Fix the conduit assy on the conduit board and then let the connection wire
between indoor unit and outdoor unit go through the conduit.
2) Fix the conduit assy on the chassis with 3 screws.
Conduit assy consists of conduit, conduit connector and lock nut.(Part to
be purchased from after market supplier.
The length of conduit can be calculated according to the length of connection wire.
Note:
 $OO ZLULQJ VKRXOG EH GRQH E\ D FHUWLILHG WHFKQLFLDQ
connection wire
sleeve
Lock nut
Cable Cross Plate

cable-cross
hole
power connection
wire
N(1) 2 3
white black red green
(blue) (brown) (yellow-
green)
Outdoor unit connection
Conduit connector
Conduit