Vehiclemri Cannot Detect The Mbt Vehicle Interface - Denso VehicleMRI User Manual

Typical Operation

VehicleMRI Cannot Detect the MBT Vehicle Interface

If the MBT vehicle interface experiences a reset condition, the device name detected
by Bluetooth in your phone or tablet will revert to a factory default name and will not
communicate with the VehicleMRI application.
Examples of the situation are summarized in the table below:
Operation
Normal
NOTE: The last 4 digits ("1234") are the last 4
Abnormal
(Reset)
NOTE: As a result of a reset, the MBT will present
DENSO Products and Services Americas, Inc.
CONTINUED
MBT Vehicle Interface Name
Example: EASE_MBT8-1234
digits of your MBT serial number.
Example: RN4678-C2F4
a default name to VehicleMRI application.
VehicleMRI Application
• Can connect to the MBT vehicle interface
and scan vehicles.
• Does not detect the MBT vehicle interface
because the name has changed.
• Cannot connect to the MBT, hence unableto
scan a vehicle.
NOTE: It is possible to use the Bluetooth
detection in the phone or tablet to
find the MBT, but the application will
not connect.
Page 5 VehicleMRI MBT Vehicle Interface