Safety Information - Denso VehicleMRI User Manual

Safety Information

For your safety, read this manual thoroughly before operating your inspection tool. Always
refer to and follow safety messages and test procedures provided by the manufacturer of the
vehicle being tested.
The safety messages presented below help prevent personal injury and equipment damage
and are reminders to the operator to exercise extreme care when using this inspection tool.
Save This User Guide
For your safety, read all instructions. Use your inspection tool only as described in this user
guide. For additional information, please contact DENSO.
Safety Instructions
1. Do not insert the MBT into the vehicle OBD-II port while the ignition is "ON."
2. Do not submerge the MBT in liquids.
a. If liquids should enter the MBT, disconnect the MBT from OBD-II connector and
contact tech support.
b. Do not expose the MBT to rain or moisture.
c. Do not place the MBT interface outdoors.
3. Do not drive the vehicle while the MBT is plugged in the OBD-II port.
4. Always remove the MBT after completing a vehicle scan.
DENSO Products and Services Americas, Inc. Page 2 VehicleMRI MBT Vehicle Interface