Typical Operation - Denso VehicleMRI User Manual

Typical Operation

Paired Bluetooth® Device
Once the MBT has been selected within the VehicleMRI application, a "request to pair" with the
Host device (phone/tablet) will appear during the first scan.
Scanning with VehicleMRI
Plug the MBT into the vehicle DLC. Follow the setup instructions in VehicleMRI to discover and
connect to your MBT. The MBT LED indicators will begin to change color and flash to show the
communication status.
Definition
V Vehicle
B Bluetooth
Host Device
H
(phone/tablet)
Operations
Power OFF
Power ON Startup
Power ON Standby Mode
Vehicle Scanning
DENSO Products and Services Americas, Inc.
V
LED State
All three LED's are not illuminated.
1. V is Solid Red, B is OFF and H is Solid Amber.
2. V is Solid Green, B is OFF and H is Solid Amber.
3. V is Solid Red, B is Slow Blink Blue and H is Solid Amber.
4. V is Solid Amber, B is Slow Blink Blue and H is Solid Amber.
5. V is Solid Red, B is Slow Blink Blue and H is Solid Red.
V is Solid Red, B is Slow Blink Blue and H is Solid Red.
1. V is Solid Red, B is Fast Blink Blue and H is Fast Blink Green.
2. V is Solid Red, B is Fast Blink Blue and H is OFF. (Normally waiting
for user input.)
3. V is Solid Red, B is Fast Blink Blue and H is Fast Blink Green.
4. V is Fast Blink Red, B is Fast Blink Blue and H is Fast Blink Green.
B H
Page 4 VehicleMRI MBT Vehicle Interface
LED Patterns
OFF
ON
ON Slow
Blinking
ON Fast Blinking
V B H