Random Play; Usb Operation - Hyundai TRC 788 AU3BS Instruction Manual

NOTE: If there are several folders in the USB or MP3 disc , it is necessary to program folders
first and then the tracks. Press the 10/FOLD./M.+ and 10/FOLD./M.- to select the first
folder you want to program. After that, press
first desired track to be programmed, press the PROG./P-MODE button to enter. The
display changes to show P02.
REPEAT
To Repeat a Single Track
1) Press the PROG./MEM./P-MODE button once in play mode, " REP-1 " will show steady on
the display. The current track will be played repeatedly until the STOP button is pressed.
2) To cancel Repeat function, press the PROG./MEM./P-MODE button until the "REP-1"
disappear on the LCD display.
To repeat all the Tracks
1) Press PROG./MEM./P-MODE button in play mode till the "REP-ALL" shows steady on the
display, all tracks on the disc will be played repeatedly until the STOP button is pressed.
2) To cancel Repeat function, press the PROG./MEM./P-MODE button until the "REP-ALL"
disappear on the LCD display.
To repeat current folder (for MP3 only)
1) Press PROG./MEM./P-MODE button in play mode, till the "REP-ALBUM" shows steady on
the display, the current folder will be played repeatedly until the STOP button is pressed.
2) To cancel Repeat function, press the PROG./MEM./P-MODE button until the "REP-ALBUM"
disappear on the LCD display.

RANDOM PLAY

Press the PROG./MEM./P-MODE button in play mode till the "RADOM" shows steady on the
display, the random play will start immediately until all tracks are played over and then stop.
Press the PROG./MEM./P-MODE button once to cancel.
INTRO
Press the ROG./MEM./P-MODE button on unit in play mode till the "INTRO" shows steadily on
the display, the intro play will start and scan 10 seconds for every track. To cancel intro play,
press the ROG./MEM./P-MODE button until "INTRO" disappear from the display.

USB OPERATION

1) Press the STANDBY/FUNCTION button to choose USB mode.
2) Connect the USB to the USB INPUT. The LCD will show the total number of tracks and
folders stored in the USB. After reading the USB (The unit can support up to 32 G USB
device), the unit will start playback automatically.
3) Press the button on unit to stop playing. The display will show total number of USB and
folders and STOP.
4) Proceed repeat play (repeat 1- repeat folder - repeat all-INTRO)/program play/skip up and
back operation as the same described in above "CD/MP3 OPERATION".
CAUTION:
Do not use any USB extension cable for connecting the USB bar which may cause harmful
interference.
/TUN.+ or
ENG - 36
/TUN.- button to chose the