Protecting Recording; Loading A Disc - Hyundai TRC 788 AU3BS Instruction Manual

The use of C120 cassettes is NOT recommended in this machine.

PROTECTING RECORDING

Normally, anything recorded on the tape is automatically erased when new recording is made.
It is possible to protect your recording from accidental erasure by removing the tabs found on the
rear of the cassette.
When the cassette is held with the recorded side upper-most and exposed tape facing the front, the
protective tab will be found on the left rear of the cassette. All pre-recorded cassette are protected
in this way to prevent accidental erasure of the commercial recording. "Protected" cassette will
prevent the record button from being operated. If at any time you attempt to record and find that this
button will not depress, never force the mechanism or it may be damaged. Check that a cassette
has been loaded and that tab has not been removed. Recording on a cassette from which the tabs
have been removed can be done by covering the tab openings with a piece of adhesive tape.
CARE OF CASSETTE MECHANISM
Gently clean the tape head and pinch wheel/capstan assemblies after every 10 hours of using the
unit. A range of cassette care products are available.
The erase head and record/play head and the surface of the pinch roller are delicate and must
not be touched with metal objects such as screwdrivers. You may find it easier to clean the
assembly by pressing the PLAY button to bright head and pinch roller into view. Be sure to press
the STOP button after cleaning the mechanism.
Damage to the pinch wheel can occur if the unit is left in PLAY mode with the power switch off.
Under no circumstances should you attempt to lubricate any part of the machine.
CD/MP3 OPERATION
Discs for Playback
This system can playback all digital audio CD, MP3, WMA finalized digital audio CD-Recordable
(CD-R) discs, finalized digital audio CD-Rewritable (CD-RW) discs and CD-DA format digital
audio CD/CD-R/CD-RW discs.

LOADING A DISC

1) Press the STANDBY/FUNCTION button to choose CD mode.
2) Open the CD door. " OPEN " will be shown on the display.
3) Place an audio CD into the tray with the label side facing up.
4) Close the CD door. The total number of tracks will appear on the display after reading finished.
5) To remove the CD, press STOP BUTTON and open CD compartment lid, grasp the CD by its
edges, and carefully take it out.
RECORD/PLAY HEAD
ERASE HEAD
ENG - 34
ERASE TAB
FOR SIDE "A"
CAPSTAN
PINCH ROLLER