Line Out Connection; Headphone Operation; Care And Maintenance - Jensen JTA-245 User Manual

You can connect this unit to an external Hi-Fi / AMPLIFIER system by connecting the RCA LINE OUT JACKS (#16) to
the auxiliary input jacks on your Hi-Fi / AMPLIFIER system with RCA cables (not included).
Note:
The Volume control on the JTA-245 will not adjust the volume when using the RCA LINE OUT JACKS (#16).
Plug your headphones (not included) into the HEADPHONE JACK (#14) on the front of the unit for private listening.
After plugging in the headphones, the speakers will be automatically disconnected.
WARNING : ALWAYS LOWER THE VOLUME LEVEL BEFORE PUTTING ON YOUR
HEADPHONES. OTHERWISE YOUR HEARING COULD BE DAMAGED.
RECORD CARE AND MAINTENANCE
To ensure the best sound and the least amount of wear on your records, it's essential that they are kept clean. Make
sure your records, especially older ones are sufficiently cleaned prior to playing
Thoroughly clean dust off the stylus and record regularly.
• Use a soft brush to clean the stylus. Brush from the base to the tip as shown below.
• For records with only light amounts of dust, we recommend brushing them off with a carbon fiber brush or velvet
pad before playing them.
brushes, velvet pads and record cleaning kits are available online or in local record stores.
• Using a mild dish soap and warm water for washing your records will also help remove excess dirt and dust that
builds up over the years. Use a microfiber cloth when washing and wiping off any excess water from the record
once they have been cleaned
NOTE:Remember, the best cleaning in the world just removes all the dust and dirt. Some records will have scratches
and groove wear. No amount of cleaning will fix this. So after cleaning, some records may sound "perfect" and others
may not.

LINE OUT CONNECTION

HEADPHONE OPERATION

CARE AND MAINTENANCE

Use a good quality record cleaner and brush set to keep your records clean. Carbon fiber
them.
E9