Phono Operation; External Speaker Connection - Jensen JTA-222 User Manual

3-speed stereo turntable with am/fm stereo radio
Hide thumbs Also See for JTA-222:
Table of Contents

Advertisement

Noted :
- Remove the stylus protector.
- Be sure that the tone arm is being detached from the tone arm rest before
operating and re-secured again afterwards.
1.
Rotate the function selector (#5) to PHONO position.
2.
Set the Speed selector (#12) to the proper position depending on the
record to be played.
3.
Place the record on the platter; use the 45 RPM adapter (#11) if
required.
4.
Lift the tone arm from the rest and slowly move it to the record side. The
platter will start to rotate.
5.
Place the tone arm to the desired position of the record.
6.
Adjust the volume to the desired level.
7.
At the end of record, the platter will automatically stop rotating. Lift the tone
arm from the record and return it to the rest.
8.
To stop manually, lift the tone arm from the record and return it to the rest.
Remark : As some kinds of record the auto-stop area was out of the unit setting, so it will stop before the last rack
finish. In this case, select the auto-stop switch (#13) to " off " position, then it will run to the end of the record
but will not stop automatically (turn off the unit by power button or switch back the auto-stop switch (#13) to
"on" position to stop the platter rotate). Then put back the tone arm to the rest position.
You can connect the system to your external speaker (4 ohm/ 3Watts) to get better sound quality. Connect the
red/white wire of your speaker to red terminal (#15) of the unit and black wire connect to black terminal (#15) then
slide the built in speaker shut-off switch (#17) to "OFF" position.
Remark : Please do not connect external speaker and built in speaker shut-off switch (#17) set to "ON" position , it
will damage the unit
.
You can enjoy the music personally by connect your earphone to the earphone jack (10) of the unit.
Remark : To avoid damage your listening, please set the volume level (8) in low position during use earphone.

PHONO OPERATION

EXTERNAL SPEAKER CONNECTION

USING HEADPHONE (NOT INCLUDED)
E-7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents